home *** CD-ROM | disk | FTP | other *** search
- From: dahlen@stefanie.prima.ruhr.de (Christoph Maria Dahlen)
- Subject: Re: Blizzard 1230IV how good ?
- Message-ID: <xFVTrMDA3aUz1@stefanie.prima.ruhr.de>
- Date: Mon, 5 Feb 96 00:52:59 CET
- Newsgroups: comp.sys.amiga.programmer,comp.sys.amiga.hardware,alt.sys.amiga.demos,de.comp.sys.amiga.tech,de.comp.sys.amiga,z-netz.rechner.amiga.hardware
- References: <4f21a5$i2s@ousrvr3.oulu.fi>
- X-Newsreader: MicroDot 1.11beta16 [REGISTERED 0000a3]
- Organization: Prima e.V., Germany
- Path: stefanie.prima.ruhr.de!not-for-mail
- Mime-Version: 1.0
- Content-Type: text/plain; charset=ISO-8859-1
- Content-Transfer-Encoding: 8bit
-
- Bezugsnachricht Re: Blizzard 1230IV how good ?
- von mysti@stekt.oulu.fi (Jarkko Kemppainen)
- ------------------------------------------------
-
- > : I assume right it got 030-50 + MMU , able to swith it off and run on 020 ?
- > : (if the 020 then could use the turbos fastmem, that would be a feature !)
- >
- > As I told you about the blue stripes, just hold down "2" from
- > keyboard and it will boot on 020 mode.. without the fast mem :(
-
- As for this feature is described not in the handbook of my Blizzard IV
- (bought it at september), how to switch back to 68030 mode without
- doing a cold reboot ?
-
- cmd
-
- --
- Christoph Dahlen | dahlen@stefanie.prima.ruhr.de
- SteinΣckerstr.37 | http://www.prima.ruhr.de/home/stefanie
- D-44225 Dortmund | ERROR 83: PRINTER DEVICE IS READ ONLY
-